HOW TO PROTECT INDOOR PVC FLOOR IN SUMMER ?

The current hot and humid weather under the influence of the indoor PVC floor prone to plate shrinkage, splicing gap widening, cracking, arch and other issues, therefore, the floor should pay attention to maintenance and maintenance work.
 
* Diligent in ventilation
Summer rainy days must always be ventilated. This kind of weather, hot flashes serious, confined environment is more likely to make the floor arch, curling and other phenomena, so the indoor PVC stadium must regularly view, ventilation
 
 
* Keep dry
Although the environment hot flashes, but must pay attention to keep the floor dry and clean. In the clean-up and maintenance is not allowed to use a dripping mop mopping the floor, or with alkaline water, soap and water to avoid, so as not to increase the floor moisture, damage the surface of the gloss.
 
* Rainy day window
When it rains, the stadium should immediately close the doors and windows, as far as possible south or south east of the doors and windows closed, only open the wind direction of the window to reduce water vapor into the room, to avoid unnecessary loss of wet floor. When the weather turns fine, open all doors and windows at once to speed up the evaporation of water vapor. At the same time pay attention to the day, noon outdoor air humidity at the highest value do not window, in the afternoon or evening is relatively dry, the window to adjust the indoor air humidity.
 
 
* Do a good job of moisture
Open the air conditioning function of the humidity, so that the indoor humidity down, to avoid the accumulation of moisture caused by the formation of arch phenomenon. Air conditioning as far as possible not to face the floor blowing, feeling the indoor dry can be properly humidified. When going out, should also pull the curtains, to avoid the sun straight floor, so as to avoid the board fade.
 
* Immediate repair
Once the floor has been found arch phenomenon, should be timely maintenance, to avoid the problem increased. At the same time as the arch part of the try not to stampede, to avoid damage to the slot can not be fully restored.
 
 
* Regular cleaning
In order to better maintain the plate, the daily cleaning should use a soft broom cleaning, can also be wiped or dust soaked in the mop dust removal in addition to trace. General oil stains can be cleaned with a specially diluted medium detergent, which can be wiped with a dry cloth.